Micro Metal Gear Motor 1.5-12V (10:1)

This fast Micro Metal Gear Motor has a 10:1 gear ratio and can be operated from a wide voltage range.

This gearbox motor uses an N20 sized motor. It is a small motor with a durable all metal gearbox. The 10:1 gearbox reduction ratio spins the shaft at a quick 1500 rounds per minute when operated at 6V. The motor can be driven at voltages from 1.5-12V DC. The Micro Metal Gear Motor is about an inch long and weighs less than half an ounce.

Motor Specifications
Motor Type	Gearbox
Motor Voltage	1.5-12 V
Gear Ratio	10:1
No-Load Current at 3V	80 mA
No-Load Speed at 3V	750 RPM
Stall Current at 3V	100 mA
Stall Torque at 3V	0.3 kg-cm (4.2 oz-in)
No-Load Current at 6V	160 mA
No-Load Speed at 6V	1500 RPM
Stall Current at 6V	200 mA
Stall Torque at 6V	0.3 kg-cm (4.2 oz-in)
No-Load Current at 12V	200 mA
No-Load Speed at 12V	3000 RPM
Stall Current at 12V	300 mA
Stall Torque at 12V	0.8 kg-cm (11.1 oz-in)
Dimensions
Shaft Diameter	3 mm (0.1 in) D shaft
Shaft Length	10 mm (0.4 in)
Size	35 x 12 x 10 mm (1.4 x 0.5 x 0.4 in)
Weight	11 g (0.4 oz)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: