Your shopping cart is empty!
This Micro Metal Gear Motor has a 100:1 gear ratio and can operate from a wide range of voltages.
This N20 sized motor is very small but has a durable all metal gearbox. With a reduction ratio of 100:1, this gearbox motor runs at about 150 rounds per minute at 6V. It can operate at voltages from 1.5-12V DC. The Micro Metal Gear Motor is about an inch long and weighs less than half an ounce.
Motor Specifications | |
Motor Type | Gearbox |
Motor Voltage | 1.5-12 V |
Gear Ratio | 100:1 |
No-Load Current at 3V | 80 mA |
No-Load Speed at 3V | 75 RPM |
Stall Current at 3V | 100 mA |
Stall Torque at 3V | 1.2 kg-cm (16.7 oz-in) |
No-Load Current at 6V | 160 mA |
No-Load Speed at 6V | 150 RPM |
Stall Current at 6V | 200 mA |
Stall Torque at 6V | 2.4 kg-cm (33.3 oz-in) |
No-Load Current at 12V | 200 mA |
No-Load Speed at 12V | 300 RPM |
Stall Current at 12V | 300 mA |
Stall Torque at 12V | 4 kg-cm (55.6 oz-in) |
Dimensions | |
Shaft Diameter | 3 mm (0.1 in) D shaft |
Shaft Length | 10 mm (0.4 in) |
Size | 35 x 12 x 10 mm (1.0 x 0.5 x 0.4 in) |
Weight | 11 g (0.4 oz) |