Graphic LCD 84x48 (Nokia 5110) Black on Blue

This Graphic LCD Module provides 84x48 pixel graphics with a blue backlight. An integrated PCD8544 controller allows images to be drawn using a serial bus interface. There are four holes for mounting onto your project. A pin header at the rear can be plugged directly into a breadboard for easy prototyping and experimenting.

This LCD module is fully compatible with the IBridge Lite 3x3 Keypad Shield and the IBridge 4x4 Keypad Shield. Simply plug it into one of these shields to create an Arduino UI.

This version has the male header connector pre-soldered into place. Choose the Black and White version if you prefer to solder the header yourself.

Note that these popular LCD displays are no longer manufactured and have been recycled. Some of displays may have small blemishes that don't affect their operation.

Pin Assignments

Pin	Label	Description
1	VCC	2.7V - 3.3V power supply input
2	GND	Ground
3	SCE	Chip enable (active low)
4	RST	Reset (active low)
5	D/C	Data/command select (data=high, command=low)
6	DN(MOSI)	Serial data input
7	SCLK	Serial clock input
8	LED	Backlight 2.7V to 5V

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: