Your shopping cart is empty!
These N20 sized Micro Metal Gear Motors operate from 1.5-12V with a 150:1 gear ratio.
This strong motor has an all metal gearbox with a 150:1 reduction ratio. It is only about one inch long and weighs less than half an ounce but can deliver about 44 ounce-inches of torque at 6V when stalled. This motor spins at about 100 RPM at 6V.
Motor Specifications | |
Motor Type | Gearbox |
Motor Voltage | 1.5-12 V |
No-Load Current at 3V | 60 mA |
No-Load Speed at 3V | 50 RPM |
Stall Current at 3V | 100 mA |
Stall Torque at 3V | 1.6 kg-cm (22.2 oz-in) |
No-Load Current at 6V | 160 mA |
No-Load Speed at 6V | 100 RPM |
Stall Torque at 6V | 3.2 kg-cm (44.4 oz-in) |
No-Load Current at 12V | 200 mA |
No-Load Speed at 12V | 200 RPM |
Stall Current at 12V | 300 mA |
Stall Torque at 12V | 7 kg-cm (97.2 oz-in) |
Servo Specifications | |
Stall Current at 6V | 200 mA |
Dimensions | |
Shaft Diameter | 3 mm (0.1 in) D shaft |
Shaft Length | 10 mm (0.4 in) |
Size | 35 x 12 x 10 mm (1.4 x 0.5 x 0.4 in) |
Weight | 11 g (0.4 oz) |