Graphic LCD 84x48 (Nokia 5110) Black on White

The 5110 LCD Module provides a small 84x48 pixel graphic display with a white blacklight. The LCD includes a controller module to simplify the interface with your microcontroller. A pin header at the rear of the module can be plugged directly into a breadboard for quick prototyping. Four corner mounting holes are provided for placement onto your finished project.

This module can be plugged directly into the IBridge Lite 3x3 Keypad Shield or IBridge 4x4 Keypad Shield for a complete Arduino UI solution.

This version comes with an 8 pin male header that requires soldering. Choose the Black on Blue version if you prefer to have the header already soldered on.

Please note that this popular LCD display is no longer manufactured so these modules contain recycled screens. The display may contain small blemishes.

Pin Assignments

Pin	Label	Description
1	VCC	2.7V - 3.3V power supply input
2	GND	Ground
3	SCE	Chip enable (active low)
4	RST	Reset (active low)
5	D/C	Data/command select (data=high, command=low)
6	DN(MOSI)	Serial data input
7	SCLK	Serial clock input
8	LED	Backlight 2.7V to 5V

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: